| 杨风伟,魏廷贤,王晓辉.应用加工助剂提高冷喂料挤出质量[J].轮胎工业,2000,(7):407-409 |
二维码（扫一下试试看！） |
| 应用加工助剂提高冷喂料挤出质量 |
|
| |
| DOI： |
| 中文关键词: 加工助剂 胎面 冷喂料挤出 分散度 |
| 英文关键词: processing aid tread cold-feed extrusion dispersity |
| 基金项目: |
| 中图分类号:TQ330.3 |
|
| 摘要点击次数: 871 |
| 全文下载次数: 770 |
| 中文摘要: |
| 研究了增塑剂A和胶易素T278在轮胎胎面胶中的应用。结果表明，在原生产配方中加入1.5份增塑剂A和0.8份胶易素T27，可明显地降低胶料的门尼粘度，改善胶料的流动性及加工工艺性能，解决了冷喂料挤出过程中出现的因混炼胶分散不均而造成挤出胎面有气孔和气泡等质量问题。 |
| 英文摘要: |
| The application of plasticizer A and Gum-easy T278 to tire tread compound was investigated.The results showed that the Mooney viscosity of the compound decreased significantly，the flowability and processibity of the compound improved，and the blisters in the cold-feed extruded tread resulted from the unevenly dispersed mix were eliminated by adding 1.5 phr of plastisizer A and 0.8 phr of Gum-easy T278. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
