| 庄建东,韩会娟,温科.硫化测温技术在轮胎生产中的应用[J].轮胎工业,1999,(3):167-169 |
二维码（扫一下试试看！） |
| 硫化测温技术在轮胎生产中的应用 |
| Appl ication of Curing Temperature Tester to Tire Production |
| |
| DOI： |
| 中文关键词: 硫化温度 等效硫化 轮胎 |
| 英文关键词: curing temperature equivalent vulcanization tire |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 672 |
| 全文下载次数: 465 |
| 中文摘要: |
| 用JLW212型硫化测温仪对现生产硫化罐硫化9.00-20 16PR 轮胎进行硫化温度测定,获得了硫化温度在轮胎各部位的变化情况,并以此得到各部位胶料的硫化程度,发现均存在过硫现象,适当调整工艺条件,硫化外温由143 ℃改为151 ℃,硫化时间缩短5 min 后,轮胎机床耐久性能提高显著。 |
| 英文摘要: |
| The curing temperatureof 9.00-20 16PR tire in autoclave was determined with JLW212 Curing Temperature Tester. The curing states of compounds at different locations were deduced f rom the measured curing temperatures. It was found that almost all compounds were overcured.The wheel test endurance improved significantly by increasing the curing mold temperature f rom 143 ℃to 151 ℃and shortening the curing cycle by 5 min. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
