| 佐家军,陆 林,郑 伟,高 禄,王皓明.全钢载重子午线轮胎胎圈露线的原因分析及解决措施[J].橡胶科技,2024,22(6):0343-0345. |
二维码（扫一下试试看！） |
| 全钢载重子午线轮胎胎圈露线的原因分析及解决措施 |
| Causes Analysis and Solutions for Bead Exposed Cord of All-steel Truck and Bus Radial Tire |
| 投稿时间：2023-05-26 修订日期：2023-05-26 |
| DOI：10.12137/j.issn.2095-5448.2024.06.0343 |
| 中文关键词: 全钢载重子午线轮胎 胎圈露线 产品设计 工艺控制 |
| 英文关键词: all-steel truck and bus radial tire bead exposed cord product design process control |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1045 |
| 全文下载次数: 451 |
| 中文摘要: |
| 从产品设计和工艺控制方面分析全钢载重子午线轮胎胎圈露线的原因，并提出相应的解决措施。通过适当增大成型平面宽和鼓肩宽，适当减小钢丝圈内侧胎侧厚度和胎趾角度，严格控制胎侧成型定位、胎坯存放、硫化机机械手精度、钢丝圈缠绕工艺及存放等措施，有效地解决了全钢载重子午线轮胎胎圈露线问题，提高了轮胎的安全性能，降低了生产成本。 |
| 英文摘要: |
| The causes for the bead exposed cord of all-steel truck and bus radial tire were analyzed from the perspectives of product design and process control，and the corresponding solutions were proposed.By appropriately increasing the the building flat width and drum shoulder width，reducing the thickness of the inner sidewall and toe angle of the steel wire bead，strictly controlling the building positioning of the sidewall，the storage of the green tire，the precision of the vulcanizing press manipulator，the winding process and storage of the steel wire bead，and so on，the problem of the bead exposed cord of all-steel truck and bus radial tire was effectively solved，the safety performance of the tire was improved，and the production cost was reduced. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
