文章摘要
王文博,赵红霞,李云峰,王 鑫,杨振林,俞正洲.硫化胶耐磨性能的影响因素分析[J].橡胶科技,2024,22(12):0712-0715. 本文二维码信息
二维码(扫一下试试看!)
硫化胶耐磨性能的影响因素分析
Analysis of Factors Affecting Wear Resistance of Vulcanizate
投稿时间:2023-05-10  修订日期:2023-05-10
DOI:10.12137/j.issn.2095-5448.2024.12.0712
中文关键词: 硫化胶  耐磨性能  老化时间  温度  磨耗角度  磨耗里程
英文关键词: vulcanizate  wear resistance  aging time  temperature  wear angle  wear mileage
基金项目:
中图分类号:
作者单位E-mail
王文博 山东阳谷华泰化工股份有限公司 www. lyf@yghuatai. com 
赵红霞 山东阳谷华泰化工股份有限公司  
李云峰* 山东阳谷华泰化工股份有限公司 www. lyf@yghuatai. com 
王 鑫 齐鲁工业大学  
杨振林 山东阳谷华泰化工股份有限公司  
俞正洲 山东阳谷华泰化工股份有限公司  
摘要点击次数: 173
全文下载次数: 110
中文摘要:
      研究硫化胶耐磨性能的影响因素。结果表明:随老化时间的延长,硫化胶的DIN磨耗量增大,耐磨性能降低;高温下硫化胶的DIN磨耗量大于在常温下的磨耗量;随着磨耗里程的增加,硫化胶的阿克隆磨耗量呈增大趋势;阿克隆试验机的磨耗角度对低炭黑用量胶料的磨耗量影响较大,磨耗角度越大,硫化胶的阿克隆磨耗量越大;湿磨条件下硫化胶的DIN磨耗量远小于干磨条件下的DIN磨耗量。
英文摘要:
      The influencing factors of wear resistance of vulcanizete were studied. The results indicated that,with the increase of aging time,the DIN wear of the vulcanizete increased and the wear resistance decreased,the DIN wear of vulcanizete at high temperatures was greater than that at room temperature.With the increase of wear mileage,the Akron wear of vulcanizete showed an increasing trend. The wear angle of the A kron testing machine had a significant impact on the wear amount of low carbon black amount vulcanizates. The larger the wear angle was,the greater the Akron wear of the vulcanizate was. The DIN wear of vulcanizete under wet grinding conditions was much smaller than that under dry grinding conditions.
Author NameAffiliationE-mail
WANG Wenbo Shandong Yanggu Huatai Chemical Co., Ltd www. lyf@yghuatai. com 
ZHAO Hongxia Shandong Yanggu Huatai Chemical Co., Ltd  
LI Yunfeng Shandong Yanggu Huatai Chemical Co., Ltd www. lyf@yghuatai. com 
WANG Xin Qilu University of Technology  
YANG Zhenlin Shandong Yanggu Huatai Chemical Co., Ltd  
YU Zhengzhou Shandong Yanggu Huatai Chemical Co., Ltd  
查看全文   查看/发表评论  下载PDF阅读器