高荣彬,黄兆阁,杨朔,雍占福.基于三维设计软件CATIA的12.00R20变节距花纹全钢载重子午线轮胎造型设计[J].橡胶科技,2019,17(9):0502-0505. |
 二维码(扫一下试试看!) |
基于三维设计软件CATIA的12.00R20变节距花纹全钢载重子午线轮胎造型设计 |
Modeling Design of 12.00R20 Variable Pitch Pattern Truck and Bus Radial Tire Based on Three-dimensional Design Software CATIA |
投稿时间:2018-12-20 修订日期:2018-12-20 |
DOI:10.12137/j.issn.2095-5448.2019.09.0502 |
中文关键词: 全钢载重子午线轮胎 造型设计 三维设计软件 CATIA 花纹 节距 |
英文关键词: truck and bus radial tire modeling design three-dimensional design software CATIA pattern pitch |
基金项目: |
中图分类号: |
|
摘要点击次数: 2077 |
全文下载次数: 441 |
中文摘要: |
介绍基于三维设计软件CATIA的12.00R20 BS28变节距花纹全钢载重子午线轮胎造型设计。利用CATIA进行花纹的绘制和轮胎三维造型的设计,可以求出轮胎半成品的体积和尺寸,完成复杂花纹的施工设计。基于CATIA的变节距花纹全钢载重子午线轮胎设计具有明显优势,材料分布情况更接近实际,尺寸更准确;施工设计更合理,轮胎合格率和工艺稳定性提高;设计周期缩短,试制次数减少,且开发成本降低。 |
英文摘要: |
This paper introduced the modeling design of 12.00R20 BS28 variable pitch pattern truck and bus radial tire based on three-dimensional design software CATIA.The volume and size of semi-finished tire was obtained by using CATIA to draw the pattern and design the three-dimensional modeling of tire,and the construction design of complex pattern was able to be completed.The variable pitch pattern truck and bus radial tire design based on CATIA had obvious advantages,the material distribution was closer to reality,the size was more accurate,the construction design was more reasonable,the qualification rate of tire and process stability were improved,the design cycle was shortened,the number of trial production was reduced,and the development cost was reduced. |
|
查看全文
查看/发表评论 下载PDF阅读器 |