| 李晓辉,刘超,林辉宝,宁卫明,张昆,冯金巧.轮胎五刚特性的有限元仿真[J].橡胶科技,2019,17(2):0078-0082. |
二维码（扫一下试试看！） |
| 轮胎五刚特性的有限元仿真 |
| Finite Alement Simulation of Five Kinds of Stiffness Characteristics of Tire |
| 投稿时间：2018-02-01 修订日期：2018-02-01 |
| DOI：10.12137/j.issn.2095-5448.2019.02.0078 |
| 中文关键词: 子午线轮胎 刚性 有限元分析 仿真 |
| 英文关键词: radial tire stiffness finite element analysis simulation |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 2949 |
| 全文下载次数: 2305 |
| 中文摘要: |
| 以225/50R18半钢子午线轮胎为例，利用ABAQUS软件对其五刚特性进行仿真，仿真的边界条件设置完全参照GB/T 23663—2009。通过对轮胎五刚特性试验的有限元仿真，得到轮胎不同条件变形情况的云图及对应的刚性特性曲线，仿真结果与试验结果基本一致。该有限元仿真方法可以对轮胎的五刚特性进行提前预报。 |
| 英文摘要: |
| Taking the 225/50R18 semi-steel radial tire as an example，the ABAQUS software was used to simulate its five kinds of stiffness characteristics.The boundary conditions of simulation were set fully according to GB/T 23663—2009.Through the finite element simulation of five kinds of stiffness characteristics test of tire，the cloud picture of tire deformation under different conditions and the corresponding stiffness characteristic curves were obtained，and the simulation results were basically consistent with the test results.The finite element simulation method could predict the five kinds of stiffness characteristics of tire in advance. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
