|
二维码（扫一下试试看！） |
| XC-1500型卧式裁断机的改造 |
| Reformation of XC-1500 Horizontal Cutting Machine |
| Received:November 03, 2019 Revised:November 03, 2019 |
| DOI：10.12137/j.issn.2095-5448.2020.01.0053 |
| 中文关键词: 卧式裁断机；改造；胎体帘布；裁断角度；送布装置；裁断装置 |
| 英文关键词: horizontal cutting machine；reformation；carcass cord；cutting angle；feeding device；cutting device |
| 基金项目: |
| 中图分类号: |
| Author Name | Affiliation | E-mail | | LI Xiaohua* | Sichuan tire rubber (Group) Co., Ltd | lixh61888@126.com |
|
| Hits: 1541 |
| Download times: 3 |
| 中文摘要: |
| 介绍XC-1500型卧式裁断机的主要技术参数、基本结构和工作原理。由于XC-1500型卧式裁断机不能满足胎体帘布裁断角度大于45°的要求，需要进行改造。设计了送布装置改造和裁断装置改造两种方案，对比分析确定裁断装置的改造方案并进行实施，改造后既不影响设备结构完整性，又降低了劳动强度，满足了裁断角度、生产效率和工艺质量的要求。 |
| 英文摘要: |
| The main technical parameters，basic structure and working principle of XC-1500 horizontal cutting machine was introduced.Because XC-1500 horizontal cutting machine could not meet the requirement that the cutting angle of carcass cord fabric was more than 45°，it needed to be reformed.Two schemes of fabric feeding device reformation and cutting device reformation were designed.The reformation scheme of cutting device was determined and implemented through comparison and analysis.After reformation，the structural integrity of the equipment was not affected and the labor intensity was reduced，which met the requirements of cutting angle，production efficiency and process quality. |
|
View Full Text
View/Add Comment Download reader |
| Close |
