文章摘要
本文二维码信息
二维码(扫一下试试看!)
轮胎力传递率试验影响因素的研究
Study on Influencing Factors of Tire Force Transfer Rate Test
Received:November 28, 2022  Revised:November 28, 2022
DOI:10.12137/j.issn.2095-5448.2023.02.0094
中文关键词: 轮胎;力传递率;噪声、振动与声振粗糙度
英文关键词: tire;force transfer rate;noise,vibration and harshness
基金项目:
中图分类号:
Author NameAffiliationE-mail
GUAN Shengxin* Wanli Tire Co.,Ltd guanshengxin@wanlitire.cn 
ZHOU Tao Wanli Tire Co.,Ltd  
DING Junjie Wanli Tire Co.,Ltd  
Hits: 1018
Download times: 605
中文摘要:
      研究轮胎力传递率试验的影响因素,包括轮胎充气压力、测试敲击方式、轮辋、生产批次和加速度传感器粘贴胶。结果表明:轮胎充气压力、测试敲击方式、轮辋、生产批次和加速度传感器粘贴胶对轮胎一阶频率有一定的影响,波动范围为1~4 Hz,其中轮辋的影响最大,测试敲击方式的影响较小;对空腔频率的影响相对小一些,甚至几乎无影响;对一阶幅值比和空腔幅值比均有影响。
英文摘要:
      The influencing factors of tire force transfer rate test were studied,including tire inflation pressure,test knock mode,rim,production batch and accelerator sensor adhesive.The results showed that tire inflation pressure,test knock mode,rim,production batch and acceleration sensor adhesive had a certain influence on the first order frequency of tire,and the fluctuation range was 1~4 Hz,of which rim had the largest influence and test knock mode had a small influence.The influence of the factors on the cavity frequency was relatively small,or almost no effect.Both the first order amplitude ratio and the cavity amplitude ratio were affected by the factors.
View Full Text   View/Add Comment  Download reader
Close