| 张亚辉,王洁,申玉德.30.5L－32 ALS28钢丝帘线缓冲层林业轮胎的设计[J].轮胎工业,2020,40(5):0273-0275 |
二维码（扫一下试试看！） |
| 30.5L－32 ALS28钢丝帘线缓冲层林业轮胎的设计 |
| Design on 30.5L－32 ALS28 Steel Cord Breaker Ply Forest Tire |
| 投稿时间：2019-01-24 修订日期：2019-01-31 |
| DOI：10.12135/j.issn.1006-8171.2020.05.0273 |
| 中文关键词: 林业轮胎 钢丝帘线缓冲层 结构设计 施工设计 耐磨性能 |
| 英文关键词: forest tire steel cord breaker ply structure design construction design wear resistance |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1034 |
| 全文下载次数: 533 |
| 中文摘要: |
| 介绍30.5L－32 ALS28钢丝帘线缓冲层林业轮胎的设计。结构设计：外直径 1 845 mm，断面宽 750 mm，行驶面宽度 758 mm，行驶面弧度高 90 mm，胎圈着合直径 812 mm，胎圈着合宽度 685 mm，断面水平轴位置（H1/H2） 0.702，人字形花纹，花纹深度 32 mm，花纹饱和度 32%，花纹周节数 16。施工设计：胎面采用缠绕法成型，胎体采用10层1400dext/3V1锦纶66浸胶帘布，缓冲层采用4层3×0.20＋6×0.35HT钢丝帘线，采用半芯轮式成型机成型，胶囊硫化机硫化。成品轮胎试验结果表明，成品轮胎充气外缘尺寸及胎面胶强度和耐磨性能达到设计和相应国家标准要求。 |
| 英文摘要: |
| The design on 30.5L－32 ALS28 steel cord breaker ply forest tire was described.In the structure design，the following parameters were taken：overall diameter 1 845 mm，cross-sectional width 750 mm，width of running surface 758 mm，arc height of running surface 90 mm，bead diameter at rim seat 812 mm，bead width at rim seat 685 mm，maximum width position of cross–section（H1/H2） 0.702，using chevron pattern，pattern depth 32 mm，block/total ratio 32%，and number of pattern pitches 16.In the construction design，the following processes were taken：tread using winding molding，10 layers of 1400dtex/3V1 nylon66 dipped cord for carcass，and 4 layers of 3×0.20＋6×0.35HT steel cord for breaker ply，using flat-core tire building machine to build tire，and bladder curing press to cure tire．It was confirmed by the finished tire test that，the inflated peripheral dimension of tire，strength and wear resistance of tread compound met the requirements of design and relative national standards. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
