| 梁文兰,向宗义,汪旭波,姜张华.UG NX软件在轮胎三维模型设计中的应用[J].轮胎工业,2020,40(7):0397-0400 |
二维码（扫一下试试看！） |
| UG NX软件在轮胎三维模型设计中的应用 |
| Application of UG NX Software in Tire 3D Model Design |
| 投稿时间：2019-08-08 修订日期：2019-08-08 |
| DOI：10.12135/j.issn.1006-8171.2020.07.0397 |
| 中文关键词: UG NX软件 花纹三维模型 轮胎实体模型 节距 花纹沟 |
| 英文关键词: UG NX software pattern 3D model tire solid model pitch groove |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 990 |
| 全文下载次数: 515 |
| 中文摘要: |
| 以12.00R20矿用轮胎为例，研究UG NX软件在轮胎三维模型设计中的应用。结果表明：采用UG NX软件，通过常用特征命令（如旋转对象、规律延伸、扫略、修剪片体、面倒圆等），可以生成轮胎花纹三维模型和轮胎实体模型，快速建立轮胎三维设计模型。该设计方法可有效、准确地表达轮胎设计概念，降低轮胎设计风险，缩短产品开发周期。 |
| 英文摘要: |
| Taking 12.00R20 mine tire as an example，the application of UG NX software in tire three-dimensional（3D） model design was introduced.The results showed that UG NX software was adopted，tire pattern 3D model and tire entity model could be generated through common feature commands（such as rotating objects，regular extension，sweeping，trimming pieces，surface rounding，etc.）.At the sametime，tire 3D model could be quickly established.Tire design concept could be expressed effectively and accurately by this design method，and tire design risk was reduced，product development cycle was shortened. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
